Paper Cutting Machine Video: SQZK-920

Source:Tianming Printing Machinery¡¡¡¡ Time: 01.12.2009

Paper Cutting Machine Working conditions

power supply voltage: alternating current, rated voltage of 380 (1 ¡À 10%) V
Required floor space: equipment exterior size, surrounded by 1 m, remaining the top of the box 2 m or more space
Ground: ground floor should be solid and reliable, smooth cement floor is the best.
Manufacturers recommend: after the correction iron readjusted the balance of the machine, fixing the bottom of the device with cement
Air temperature: 5 ¡æ ~ 55 ¡æ
Relative humidity: not more than 90%
Environmental conditions: air is there pollutants should be no more than the national environmental protection requirements (such as acid material, corrosive gases, salts goods)

Paper Cutting Machine Technology Security Precautions

£¨1£©After the installation of machine, the electric motor must be properly grounded
£¨2£©Must first cut off the power when repair, adjust, refuel, clean, inspect the machine so as to avoid danger.
£¨3£©Must pay attention to the surrounding environment, to see if there are people working under the machine before starting the machine.
£¨4£©The work table are not allowed to place oiler, tools, etc. any irrelevant items when the machine is operating.
£¨5£©If the car occour accident, or there is abnormal sound and jamming phenomena you must immediately stop checking.
£¨6£©It is strictly prohibited to reach hand into the back of a cutting knife when the machine is in the process of running. Even in the parking situation, it is strictly prohibited to change or adjust bland by hand.
£¨7£©Brake parts must be frequently inspected, in any case, the knives beds are not allowed to have re-cut or spontaneous movement (sliding knife)
£¨8£©Knife , the long-handled bolt used in climbing car and the handle must to be unloaded after such work have been completed carried out, so as to avoid personal injury accident occurred when starting the machine.

Buying Guide